With the advent of winter, are you experiencing a “skin dehydration” problem? You might think that hydration is needed only in summer. In fact, the outdoor and indoor air in the northern winter is relatively dry, which causes the skin moisture to evaporate rapidly. Many people will have a series of problems such as uncomfortable throat and dry skin. Therefore, the skin needs to be hydrated in summer and winter.
In addition to using skin care products to increase the amount of water to replenish, you must also ensure indoor humidity. According to the indoor air standards issued by the state, when cooling in summer, the relative humidity should be 40% -80%. When heating in winter, it should be controlled at 30% -60%. The indoor humidity suitable for the elderly and children is 45% -50%. Therefore, in the winter heating season, the home should be equipped with a humidifier, ready to improve the problem of air drying.
The packaging of the SMARTMI Humidifier is made of kraft paper. The surface is printed with humidifier renderings, product names, manufacturer names and other data.
Unpack. At the top is the instruction manual. Through the instructions, we found that this is a spray humidifier. Unlike the other two smart humidifiers, this humidifier does not have a smart connection, eliminating the bacteria removal function. It’s not an evaporative humidifier, just an ordinary humidifier.
The product design uses a cylindrical design, without right angles, it will not bump. The design style continues the style of Xiaomi’s ecological chain. The styling materials have continued the style of the previous SMARTMI humidifier, which is simple, stylish and beautiful. The top cover, water tank and main machine are separated by three layers, which is convenient for moving and disassembling. However, there is no fixed device at the joint, so you need to pay attention during the movement.
The left side is the area responsible for atomization. Using ultrasonic high-frequency vibration, the water will oscillate into mist particles here. The right side is the upper water tank (inverted state), which is mainly responsible for storing water. In the part where the water tank is connected to the base, the smart meter humidifier introduces a water tank separation sensor. When the water tank is detached, the humidification can be quickly cut off to ensure the safety of the user.
The open water tank is easy to operate. With a 2.25L large-capacity water tank, it can be used for a long time, and it can continue to moisturize for 8 hours even when a large amount of fog is turned on. You can get a good night’s sleep peacefully.
The bottom has non-slip pads to prevent bumps during use.
The mist outlet is above the machine. It is recommended to avoid any other objects above and around when using to prevent moisture damage. The highest water level mark is attached near the fog outlet. The water tank is too full and it is easy to flow into the air outlet to damage the motor.
The air outlet is designed on the side of the purifier, and is connected to the fog outlet of the water tank. Bring the water mist after ultrasonic vibration out of the humidifier.
The water tank of the ordinary humidifier uses the principle of air pressure balance to add water, so water cannot be added from above. The smart meter humidifier uses the principle of leverage. When the water level is high enough, the float will float, and the bump on the right no longer presses the water outlet of the water tank, so that the water in the water tank no longer flows down. On the contrary, the float will be pressed down, and the bump will push the valve of the water tank to make the pure water stored in the water tank flow into the bottom.
The filter at the bottom of the water tank will remove large impurities to prevent damage to the ultrasonic oscillator from entering. The bottom of the strainer is a water tank valve. When there is a shortage of water below, because of the lever, the raised point presses the valve, and water will flow below.
A filter is also added to the air inlet at the bottom to prevent dust from entering. It is mixed with water mist and inhaled by people to endanger health. For the product, it is recommended to perform regular maintenance. In addition to the filter above the main unit, which can be removed for cleaning, the filter cotton at the bottom can be cleaned multiple times by opening the back cover. Households with high frequency of use are advised to clean it once a week.
Although this model is not intelligent, it is feature-rich and easy to operate. No mobile phone binding Mijia APP operation or Xiaoai AI control is required. After filling the water in the SMARTMI humidifier, you can use the button, which is suitable for children / elderly.
Remove the float and fixing tape from the machine. Fill the water through the filling port, or take the top cover and fill the water tank directly. Either way is fine. Pay attention to the cordon. Personally it is best to use pure water.
With only one button operation, it couldn’t be easier. This is the power key and gear shift key. Speeds 1, 2, and 3 vary with different indicator lights.
Plug it in and power it up. The smart meter humidifier has a variety of safety protections. When the water volume is low, it will automatically stand by and the indicator light flashes; avoiding dry burning in the absence of water will automatically cut off the power. This is especially suitable for unnoticed situations or when the elderly in the family have no time to change the water.
The working status indicator shows that the third gear is the largest. The rated humidification capacity is 200mL / h, which is suitable for less-large rooms / bedrooms. Of course, the noise is also very small, so you don’t have to worry about getting noisy at night.
The above picture is for demonstration purposes only. Actually stay away from this operation. Just let everyone see the humidification situation.
As a Xiaomi ecological chain enterprise, SMARTMI Technology is well-known by netizens with a series of “net red” products such as Xiaomi Air Purifier, Mijia Internet Air Conditioner, SMARTMI Natural Air Fan and SMARTMI Smart Toilet Cover. In the field of humidifiers, SMARTMI later introduced SMARTMI pure humidifiers and SMARTMI sterilizing humidifiers to solve the health problems that users care about. This time, after SMARTMI launched the SMARTMI humidifier again, on the one hand, SMARTMI completed the layout of the high, middle and low of SMARTMI humidifier product line, and on the other hand, it also met the needs of price-sensitive users to buy humidifiers.
After experiencing the experience, the author found that SMARTMI humidifier is more concise in appearance, and it is an uncompromising “low-profile family.” The 2.25L large-capacity water tank design completely eliminates users’ concerns about “frequently adding water”. At the same time, a lot of new technologies are adopted under the simple appearance. For example, the application of new fans solves the problems of spray, power consumption and noise, allowing users to “wet” your body in a quiet and undisturbed environment.
The most important point is health and safety that many people tend to overlook. Compared with many humidifier products, the design of the complex and no bright water tank. The SMARTMI humidifier is more humane, and the water injection and cleaning are very convenient to ensure that the cabinet is more clean and hygienic. The water tank is separated from the sensor to avoid the threat of electricity to our safety. At the same time, the anti-dry burning sensor is added, so that the SMARTMI humidifier can automatically power off when there is no water, to prevent the dry burning and damage the machine from causing a fire. So if you are considering buying a humidifier, consider it.
Product link:
https://aliexpress.ru/item/32953279342.html
Hope this article helps you,
May your life get better and better.
tookfun.wordpress.com 