Foreword
For a humidifier, what do you most want it to look like? What kind of functions does it have?
I think there must be a big water tank to reduce the frequency of replenishment. The sealing cap with water in the bottom of the tank is too difficult to screw. Mist amount adjustment, timing function, water shortage shutdown are certain. Oh, by the way, I hope that it can be sprayed to a high point, so as not to make the ground near the humidifier completely wet, but it is still dry in the distance. Then there is the sound not too loud during work, so as not to affect the mood, and then it is easy to clean.
Well, let’s talk about this first. I think that for humidification, when you work, you can’t feel its existence, and you don’t have to worry about it.
Program
What I am going to talk about today is this MIJIA SMARTMI UV Sterilizing Humidifier.
What exactly is this intelligent humidifier with sterilization function from Xiaomi?
Listen to me one by one.
Open the box
The packaging is quite good.
Accessory box.
The overall workmanship is still quite good, with great care. A wide voltage range of 100-240 is used, with an input of 34V, 1.76A.
Manual, there will be very important details and precautions, etc. It is recommended to read.
Measurements: Overall height 336mm, cylindrical diameter 207mm.
Product details
Top cover:
This cover has a good workmanship and is very thick.
Water tank:
Exquisite workmanship, no defects found. The water volume is clearly marked and easy to see. It has a large capacity of 3.5L and a maximum humidification volume of 384ml / h. One water injection can humidify for up to 16 hours.
Back of the bottom of the water tank:
The gray part is the fog path (wind path). The black seal is a solenoid valve that controls the flow of water.
The bottom of this water tank is supported by a frame so that there are no protrusions on the inside. Can be placed completely on a level surface.
And here is the air duct that leads directly to the air outlet above. The following animation will be more intuitively reflected.
Host computer:
Front: One-button design shared by switches and gear, with indicator lights for four gear above.
Back: light control keys, WIFI indicator lights and installation points.
Use 4 foot pads on the underside. The friction is good, and the weight after water injection can make it be placed on the surface smoothly.
The bottom air inlet is chamfered. With filter, dustproof treatment is good.
The core: The difference from ordinary humidifiers is here.
1. Buffer zone: Water enters into the buffer zone of the atomization stage through the total electromagnetic valve at the bottom of the water tank.
2. Sterilization area:
Water is injected from the buffer zone for UV sterilization. Through the dam in the middle, the outflow is designed with different depths at the same time.
SMARTMI sterilization humidifier uses Japanese Stanley cold cathode ultraviolet sterilization lamp, which can kill 98.8% of bacteria in water.
3. Atomization area: water after sterilization. The ultrasonic vibration mechanism shakes the water into fine particles to complete the process of turning water into mist.
White is an atomized sheet. The black ball is a capacitive induction water shortage protection induction ball to prevent machine damage.
4. Fan zone:
Water mist is blown into the air by the fan’s wind to increase humidity.
Water flow direction:
- Buffer zone
- Sterilization zone
- Atomization zone
- Fan zone
In addition, all wading parts are made of ABS material with a broad spectrum of antibacterial ingredients. Can effectively inhibit the growth of bacteria such as E. coli, Staphylococcus aureus and Pneumococcus.
Okay, start the internal fit, and the overall internal structure diagram.
Here you need to pay attention to this detail, you must align the positioning.
Compare this with a 2L cola bottle.
Water injection:
3.5L is not casually talked about. This is the water level after a full bottle of 2L of water is injected.
Note that when MAX is reached, less than 1/3 of the second bottle remains.
Run
Plug it in and let it work …
It’s not obvious to see the mist, but its ability is really good.
So far, I think this humidifier is quite good. As for the bactericidal function, this hidden one can only be experienced for a long time. It’s with wifi, let’s see how intelligent it is.
Intelligent control
First install the Mijia APP, enter the account number to display the previously connected devices, and select SMARTMI sterilization humidifier to directly control. It is intuitive, easy to operate, and easy to understand.
Take the following example for setting the target humidity and providing a maximum of 80%. If it is set to 60% as shown in the figure below, when the humidifier runs and the detected humidity reaches 60%, it will stop working and no longer humidify.
You can also make further planning settings for the scene.
Endurance and safety
The endurance of the humidifier is the ability to consume water. I did a small test, the second gear, running for nearly 12 hours continuously, this is the amount of water remaining. From this reasoning, it is credible to work 16 hours continuously.
Power consumption
This is a simple test. It is about 11W in the first gear, about 17W in the second gear, and about 27W in the third gear. During standby, because WIFI is always working, about 1.6W. Looks like speaking to White Goods. To be precise, White Goods with intelligent identity is still okay.
Maintenance
When the humidifier is no longer used, the water in the water tank must be cleaned. Otherwise, it will be thrown away and replaced in the next year.
What should I do if the water in the water tank is not clean? It is
Overview
Advantage:
- Fill the top with water, it can no longer be convenient, no longer need to lift the water tank, and laboriously twist the sealing cap.
- With UV sterilization function. Some are better than none. Think of the PM2.5 in the air and then mix the bacteria in the evaporated water, zzz … This is almost a welfare to enhance immunity.Fill the top with water, it can no longer be convenient, no longer need to lift the water tank, and laboriously twist the sealing cap.
- Wifi intelligent control, after carefully set up, in addition to replenishing water for it, everything is worry-free, do not feel its existence.
- More humane design, easy to clean and care.
- The security agency is scientifically set, and even if it is directly pushed down, the speed of stopping atomization is still very timely.
Disadvantages:
- The price is expensive. But compared to those big brands, it is still more cost-effective.
- Regarding mute: because when the solenoid valve is opened, the movement is still large. Fan noise control is good, but compared to a simple humidifier, it is still slightly larger.
- When water is scarce, it can only be displayed from the indicator light, no audible alarm.
- The temperature and humidity can only be viewed on the mobile phone. It is recommended to add a digital display system to the host.
Many people easily overlook the health and safety of the humidifier. Compared with many humidifier products, the design of the complex and no bright water tank. SMARTMI UV Sterilizing Humidifier is more user-friendly, water injection and cleaning are very convenient, and the box body is more clean and hygienic. The water tank is separated from the sensor to avoid the threat to our safety caused by electricity. At the same time, the addition of the anti-drying sensor allows SMARTMI Sterilizing Humidifier to automatically cut off the power when there is no water to prevent the fire from being damaged by dry burning. The main thing is SMARTMI Sterilizing Humidifier’s UV sterilization function, which reduces air pollution from impurities and bacteria in the water and protects your health. So if you are considering buying a humidifier, consider it.
Where to buy？
Product link:
Aliexpress Perfection Technology
Hope this article helps you,
May your life get better and better.
tookfun.wordpress.com 