The weather is getting colder, and the cold has already surrounded us unknowingly. Especially at night, I believe that many friends have put on warm pajamas. Before central heating, this period of time was very painful. However, the cost of using air conditioners or other traditional heating equipment is relatively high. In view of the above, we need to buy an electric heater with fast heating speed, adjustable temperature and cost-effective.
Recently, Xiaomi launched a Mi Smart Baseboard Heater E. Small body, faster heating speed. Convenient operation, freely adjustable temperature from 16°C to 28°C. It is very suitable as a heating auxiliary device.
Then Tookfun will simply share the experience of using this electric heater E.
Appearance details
Mi Smart Baseboard Heater E is packed in a rectangular carton. Multiple built-in plastic foams can effectively protect the product. Tear open the packaging box, you can see the main body of the electric heater. The electric heater is already assembled, and the user does not need to install it again. Ready to use out of the box.
The shell of the electric heater is made of metal, and the whole is white. The volume is very small, the height is 17.9cm, the width is 12.2cm, and the length is about 1.2m. This volume can be placed at will for the home environment. You can put it down on the side of the bed in the bedroom, under the desk in the living room or in the corner of the bathroom.
There is a Mijia LOGO in the middle of the front of the heater. The design continues the Mijia minimalist design style without excessive redundant embellishments and decorations. At the same time, the corners of this heater are rounded and chamfered. It can not only increase the visual beauty, but also prevent the sharp edges and corners from bumping and causing damage.
On the top of the fuselage is a grid vent of more than 1 meter. The density of the grid is very high, which increases a certain degree of safety. Through the fence, you can see the square double-tube heat sink at the bottom. The densely packed materials are very solid. The electric heater adopts a low and large air outlet design close to the ground. The heat flows from bottom to top to form a thermal air wall to isolate the cold outdoor air. The heating effect is closer to the floor heating, the heating speed is faster and more uniform, and the heating effect for the whole house will be more prominent.
This heater is smooth all around, without much extra decoration. In the lower right corner is the physical switch button. After power on, you can use the touch screen to control various functions.
Next to the air outlet is the smart LED screen. Touch to adjust the temperature, preset the shutdown time, connect to the APP, etc. In order not to disturb the user’s sleep at night, the electric heater also has an automatic screen rest function. If you don’t touch the LED screen every twenty seconds, the screen will automatically dim.
In addition, the electric heater is equipped with a non-slip base, which can be fixed on the ground more stably. Will not change position due to accidental contact.
Operation experience
Regardless of the small size of the Mi Smart Baseboard Heater E, its energy is not small. When the air outlet was introduced above, it was mentioned that the large air outlet near the ground makes the heat flow from the bottom up, which can be heated by convection circulation, and the heating is more uniform, and the heating rate is still very fast. There is no obvious wind feeling at the air outlet, but the temperature becomes higher, so there will be no uncomfortable being blown by the wind.
Mi Smart Baseboard Heater E has a built-in intelligent constant temperature system, which automatically keeps heating when the temperature is lower than the preset temperature; after reaching the preset temperature, it can automatically maintain the temperature with low power. While keeping the temperature constant, it can also reduce power consumption and save energy.
It is worth noting that. When turning on the electric heater, it is recommended to close the doors and windows of the room and adjust the temperature to the maximum first to keep the heat from dissipating, and then adjust the comfortable temperature after the room is warm.
In the above introduction, the electric heater is equipped with an LED display. We can use the display to adjust the temperature; we can also set a delayed shutdown, and the electric heater can automatically turn off after we go out.
Touch panel control
Touch the switch key to turn on the electric heater. The middle display is the real-time temperature; the right side is the timing key/open key; the left is the “+”/”-” key; the top is the wireless connection and child lock display.
Temperature adjustment can be done by touching the “+”/”-” key, and the range is 16°C to 28°C. Timing key can set the timing time, also through the “+”/”-” key to set the specific value, the value is 1 hour to 12 hours. Long press for 2 seconds to cancel the timer function.
Long press the “-” button for 3 seconds to enter the low power mode (maximum 900W), at this time you can see the screen display “LL”. This mode is very suitable for turning on when sleeping at night. Long press the “-” key for 3 seconds again to exit the low power mode. Long press the “+” button for 3 seconds to enter the full power mode (2200W), continue to heat up quickly, at this time the screen displays “HH”. Long press the “+” button for 3 seconds to exit the full power mode.
In addition, the electric heater also supports Mijia APP+AI voice intelligent control, and supports remote on/off. For example, we can turn on the electric heater before we get home from get off work, so that we can enjoy a very comfortable temperature when we go home. Or it may be very cold in the winter morning, and many friends are unwilling to get up. At this time, you can use the APP to turn on the electric heater and wait for the warm-up to get up again.
Mijia APP operation
The process of connecting to the APP is very simple. Just follow the prompts.
The APP control interface is very simple. You can view the current status of the electric heater. And there are a variety of control functions. Respectively, the switch button is used to switch the electric heater. Constant temperature setting, you can set the electric heater to keep at a certain temperature, the interval is 16℃ to 28℃, and one grid point is 1℃. Delayed shutdown function, this can set the electric heater to delay shutdown from 1 hour to 12 hours. This is also often used. After all, many people do not need to turn on the electric heater all night, and can be set to turn off for a few hours after falling asleep. Of course, it can also be set to start midway.
AI intelligent voice control
This is mainly controlled by Xiaoai voice assistant. After successfully setting through the APP, you can control the electric heater with voice. At present, this control method can only switch the machine on and off and adjust the temperature, and cannot make the electric heater enter a low-power or full-power mode.
Other
In terms of noise. Thanks to the optimized dragon-back heating structure and the infinite silent control system, the electric heater can not hear a lot of noise, and placing it at home will not disturb the normal life of the family.
In terms of power. The electric heater can automatically switch 0-2200W heating power according to the adjusted temperature. Adjust the temperature to the highest 28°C and perform power detection on it. Its power can reach more than 2100W.
In addition, the electric heater supports IPX4 waterproof. It can play a protective role for some small water droplets and fog. You can use the electric heater in the bathroom. In addition, we can hang damp clothes on the electric heater, which can play a role in drying the clothes, and there is no need to worry about the dampness of the clothes causing the electric heater to leak electricity. But be careful not to put wet clothes directly on the electric heater.
This electric heater also supports a child lock design, which can be turned on by APP. There are overheating protection and dumping power-off functions. Tested by Tookfun, the heater will automatically cut off when tilted about 45°.
Conclusion
After some use, I feel that the overall heating of Mi Smart Baseboard Heater E is still very fast. I felt the heat within a few minutes after I turned it on, and the simple operation method is very friendly to everyone in the family. The compact body can also be placed at will, placing it next to the bed in the bedroom is a good choice. In addition, the adjustable multi-speed temperature, IPX4 waterproof, etc. are also icing on the cake.
The most important thing is in terms of price. Mi Smart Baseboard Heater E has the above advantages while keeping the price at about $100, which is cost-effective compared to electric heaters with the same performance on the market. If your home warm measures are not very good, you can choose to buy Mi Smart Baseboard Heater E in this upcoming winter.
Where to buy？
Product link: TookFun Appliance Store
For more fun and interesting reviews, please follow my social homepage.
Facebook: Tookfun
VK: Tookfun
Hope this article helps you,
May your life get better and better.
tookfun.wordpress.com 